smartWLI firebolt
smartWLI firebolt – high speed sensor for production environments
The extreme speed of the 10GigE camera allows the measuring of nanostructures without anti-vibration systems in production environments.
Various stands, granite portals, vibration dumping systems and automated tip-tilt devices can allows the configuration of customized optical 3d profilers using the smartWLI firebolt as the key component for high performance measurements.
The SDK including C++ and C# libraries as well as source code for sample application allows the easy integration of the sensor in high end measuring stations for semiconductors and optics.
Using coherence scanning (white-light) interferometry to measure roughness and micro geometries
Coherence scanning (white-light) interferometry provide a much higher resolution than competitive optical 3d measuring principles as confocal microscopy, focus variation, chromatic confocal sensors, fringe projection or laser triangulation sensors. As microscopical optical measuring principle the GBScanner can be configurated using interference objectives with magnification from 2.5x up to 115x. Structures starting from lateral seize of app. 0.3 µm can be resolved. The upper limit is several mm² for single scans and several cm² for stitched areas.
Advantages of smartWLI sensors and optical profilers compared to other coherence scanning (white-light) interferometer
High speed cameras combined with massive parallel data processing allows to accelerate the data acquisition and evaluation processes and make the systems robust and less sensitive against vibrations. The acceleration enables data acquisition and stitching of several 100 single scans with typical cycle times of 1…3 seconds per single scan. The data processing including contrast enhancement, model-based signal correction and data quality surveillance enables to pick up weak signals on high sloped areas.
Direct contact to our Team:
EMail: sales@gbs-ilmenau.de
Phone: +49 3677 83710 54